How To Use Rotovator ?

Using a rotovator, also known as a tiller or cultivator, is a straightforward process that involves a few simple steps. Here is a basic guide on how to use a rotovator:

Step 1: Prepare the area Before using a rotovator, ensure that the area to be tilled is clear of any debris or obstructions. Remove rocks, large roots, or any other objects that may damage the rotovator or cause it to jam. Also, mark any areas that need special attention, such as beds or borders.

Step 2: Adjust the depth Most rotovators have an adjustable depth setting that determines how deeply the tines (blades) penetrate the soil. Adjust the depth to suit the type of soil and the level of tillage required. In general, a depth of 6-8 inches is suitable for most types of soil.

Step 3: Start the engine Check the fuel level and oil level before starting the rotovator. Start the engine according to the manufacturer’s instructions and allow it to warm up before beginning to till the soil.

Step 4: Begin tilling Position the rotovator at the edge of the area to be tilled and engage the tines. Slowly guide the rotovator forward, allowing the tines to break up the soil. Keep a steady pace and avoid rushing or forcing the rotovator through the soil.

Step 5: Repeat as necessary Once you have tilled the entire area, repeat the process if necessary, adjusting the depth and angle of the tines as needed. Be sure to till the soil in different directions to ensure even tilling and avoid creating hardpan or compacted soil.

Step 6: Clean and store the rotovator After using the rotovator, turn off the engine and allow it to cool down. Clean the tines and other parts of the rotovator to remove any debris or dirt. Store the rotovator in a dry, clean place, away from moisture and direct sunlight.

Using a rotovator can save time and effort in preparing soil for planting or other activities. By following these simple steps, you can ensure a successful tilling process and maintain the longevity of your rotovator.